logo
FAMOUS Steel Engineering Company
products
products
Home > products > Composite Floor Deck > ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet

ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet

Product Details

Place of Origin: China

Brand Name: FAMOUS

Certification: AS1397, EN 10346

Model Number: ComFlor 210 Equivalent

Payment & Shipping Terms

Minimum Order Quantity: 500 square meters

Price: Quoted per project drawing and quantity

Packaging Details: Strapping bundles with lifting marks, loaded in 20 ft or 40 ft container

Delivery Time: 15 to 25 days after drawing confirmation

Payment Terms: L/C,D/A,D/P,T/T

Supply Ability: 20000 square meters per month

Get Best Price
Highlight:

comflor 210 replacement deck

,

unpropped composite slab formwork

,

galvanized steel floor decking

Rib Height:
210 Mm
Cover Width:
600 Mm
Base Metal Thickness:
0.9 Mm To 1.5 Mm
Sheet Length:
1 M To 12 M Cut To Length
Steel Grade:
S280GD To S350GD, G500 Optional
Zinc Coating:
Z100 To Z275
Standard:
AS1397, EN 10346
Unpropped Span:
Up To 6 M
Application:
Mezzanine, Multi Storey Steel Building, Warehouse Floor
Accessories:
End Closure, Side Lap Screw, Shear Stud, Edge Trim
Rib Height:
210 Mm
Cover Width:
600 Mm
Base Metal Thickness:
0.9 Mm To 1.5 Mm
Sheet Length:
1 M To 12 M Cut To Length
Steel Grade:
S280GD To S350GD, G500 Optional
Zinc Coating:
Z100 To Z275
Standard:
AS1397, EN 10346
Unpropped Span:
Up To 6 M
Application:
Mezzanine, Multi Storey Steel Building, Warehouse Floor
Accessories:
End Closure, Side Lap Screw, Shear Stud, Edge Trim
ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet
COMPOSITE FLOOR DECK ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet Roll formed alternative profile to the ComFlor 210 deck · 210 mm rib · 600 mm cover width · unpropped to 6 m
210 mmRib height
600 mmCover width
0.9 - 1.5 mmSheet thickness
6 mUnpropped span

This galvanized steel decking sheet is a roll formed alternative profile to the ComFlor 210 deck. It works as permanent formwork for unpropped composite concrete slabs in multi storey steel frame and concrete frame buildings. The sheet carries the wet concrete during construction and, once the concrete hardens, acts together with the slab as a composite floor system that carries the imposed floor loads.

The deck is roll formed from hot dip zinc coated high tensile steel strip. Rib geometry, side lap and end detail are produced to the same dimensional envelope as the ComFlor 210 profile, so sheets can be laid out, lapped and fixed with standard site methods. Project engineers should confirm the profile and load tables against the structural design before ordering.

ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet

01Main Features
  • 210 mm deep rib profile with 600 mm cover width, produced as a dimensional alternative to the ComFlor 210 deck
  • Unpropped construction for typical spans up to 6 m, which removes props, labour hours and access restrictions on site
  • Hot dip zinc coated high tensile strip to AS1397 or EN 10346, zinc coating from Z100 to Z275 for site exposure
  • End closures, shear studs, side lap screws and edge trim supplied together with the deck
  • Sheets cut to length up to 12 m, so site cutting and off cut waste stay low
  • Composite behaviour supported by manufacturer load span tables for normal weight concrete slabs
  • Suitable for mezzanine floors, multi storey steel buildings, plant floors, warehouse floors and refurbishment slabs
02Technical Data
Item Range
Base metal thickness 0.9 mm to 1.5 mm
Rib height 210 mm
Cover width 600 mm
Sheet length 1 m to 12 m, cut to the structural layout
Steel grade S280GD to S350GD, G500 optional
Zinc coating Z100 to Z275
Standard AS1397, EN 10346
Unpropped span Up to 6 m, set by sheet thickness and slab depth
Concrete Normal weight concrete, slab depth set by the structural engineer
ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet
03Unpropped Construction
No props means a faster floor cycle

With the 210 mm rib depth the sheet spans between secondary beams without temporary props for typical floor layouts, so the prop inventory, the double handling between floors and the work at height to strike props all drop out of the programme.

The trade off is a slightly deeper structural zone, so this deck is normally selected where a clear ceiling void and a fast floor cycle matter more than the minimum slab depth. Where the design span sits outside the unpropped table, the same sheet can be used in a propped sequence, so one profile serves the whole building.

04Typical Applications
  • Mezzanine and intermediate floors inside steel framed buildings
  • Multi storey commercial and residential steel structures
  • Warehouse, plant room and workshop floors with heavy live load
  • Refurbishment and floor extension work inside existing structures
  • Slabs that need a propping free construction sequence

ComFlor 210 Replacement Deck Unpropped Composite Slab Formwork Galvanized Steel Sheet

05Packing and Delivery
Item Detail
Bundle Sheets strapped in bundles with lifting points marked
Bundle weight Set to the site crane limit on request
Marking Label with sheet length, thickness, quantity and floor reference
Loading 20 ft and 40 ft container, flat rack for long sheets
Delivery Cut to length and shipped in the installation sequence
06Request a Quotation

Send the floor layout, sheet thickness, slab depth, span between beams and the required delivery date. We will return the deck quantity, accessories list, load span tables and packing plan for the project. Custom cut lengths, alternative zinc coatings and matched accessories are available on request.