Payment & Shipping Terms:
|Material:||PPGI / GI /Aluzinc / Cold Roll||Line Speed:||Up To 10m/min|
|Material Coil Width:||Per The Design Of Product||Power:||380V 3phase Or Per The Client's Request|
|Gram Weight:||Around 30 Tons||Warranty:||1 Year|
This machine is the accessory equipment for roll forming machine or folding machine, which is used to slit coil sheet to strips , and transfer it to support it. In order to get some nonstandard width length sheets. It has many advantages such as low noisy, stable running, simple operation and nice appearance etc.
Main technical specification:
Length tolerance: +/_ 2mm in 3M in length
Cutting speed: 15 M/min
Motor power: slitter power 3 KW
Hydraulic motor power 3 KW
Cutting: cut to length automatically.
Power source: 380V/3phase/50Hz(can be meet your demand)
|Power Supply||380V 50/60HZ 3.5KW||380V 50/60HZ 4.5KW|
|Palletizing Height||Less than 2000mm||Less than 2000mm|
1) Hydraulic uncoiler(Without coil car)
Structure- cantilevered type
Expanding model: hydraulic
Releasing model: hydraulic motor
Control model: light control
Sharing the Hydraulic station with main machine
The guiding device are used to guiding the steel sheets into right position for both sides.
3 )Leveling device
This feeding device is to fix the sheet,ensure the sheet at right place.
4 )Upper and down filming device
Install the filming in the axis,adjust both sections by the defender,The pressing device is combined by rubber roller.By the movement of rotating rubber roller,the sheet can be sticked into the surface of steel sheets when moving forward.
Remark: Taper shape for the filming roller to suit different size as required by client.
5) Hydraulic cutting
Adopt stop-cutting model: decelerating→stop→cutting→start. Inspect the sheet length and send out signal by encoder With the PLC control,the roller system will decelerate in advance,when reach settled length,the roll forming system will stop working, and cut.
a) There are several pairs of slitters to slitting the sheets into strips.The strips width can be adjusted by the slitter postion.( 2&3 in both left and right.one in the middle ,with lower slitter fixed and the upper slitter movable)
b) The slitter adopt Cr12 die steel with quench treatment.
To support the finished sheets from the main machine. Change the height of supporter by the adjusting screw at the foot to suitable for the height of finished sheets..
Fixed type Protective fence