Product Details:
Payment & Shipping Terms:
|
Seismic: | Seismic | Material: | High Strength Low Alloy Steel |
---|---|---|---|
Code: | AS/NZS4671 | Grade: | 500E |
Seismic: | Seismic | Code: | AS/NZS4671 |
High Light: | steel reinforcement mesh,concrete reinforcing mesh |
Deformed HRB 500E, is a micro-alloy, hot-rolled, continuously threaded reinforcing bar which can be cut at any length.High tensile, high ductility plain carbon steel for the reinforcing of concrete available as plain and deformed bars. This steel meets the demanding requirements of the seismic structural design methods.This reinforcing derives its superior strength and ductility by micro alloying the steel with small vanadium additions. Grade HRB 500E steel is readily: weldable, hot or cold bent, threaded and galvanized. Test Certificates are available for every production batch of this product from us
Features & benefits:
1.Suitable for seismic design, ReidBar is manufactured to 500E steel specification standards.
2.Ultimate strength development is possible with short embedment depths using foot plates
3.Improves structural integrity through joining of the bar with threaded connectors.
4.Creates a full strength seismic joint – connectors are designed to exceed the capacity of the high strength 500MPa bar (with the exclusion of some Reidbrace fittings).
5.Eliminates cast in starter-bars for simple transportation, handling and avoids re-bending.
6.Removes congestion and can ease construction, eliminating the need for hooked bars.
7.Provides simple solutions for construction problems, reducing labour and material costs.
8.The system is suitable for use in thin concrete sections such as wall panels.
Specification:
1.Specified Physical Properties
Yield Point(MPa) |
Tensile Ratio |
Uniform Elongation at Max. Load(%) |
500-600 |
1.15-1.40 |
min 10% |
Remark:Yield,ratio and elongation limits are characteristic values
2.Mass Tolerance
Specific Mass Tolerance for all bar diameters=nominal mass per meter±4.5%
3.Chemical Analysis
Element |
C |
S |
P |
CE* |
Max% |
0.22 |
0.050 |
0.050 |
0.49 |
*Where CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
Remark:All figures are weight percentage values
4.Normally Available Package
Pack |
HRB 500E -Plain |
HRB 500E Deformed |
50-bar pack |
- |
10-16mm |
2-tonne bundle |
10-20mm |
10-40mm |
5.Bar Lengths
Bar Diameter |
Lengths Available |
10&12mm |
6 - 12m (in 1m increments) |
16-40mm |
6 - 18m (in 1m increments) |
Waterproof and Pre-engineered Prefabricated Steel Structural Steel Fabrications
Pre-engineering Components Structural Steel Fabrications For Industrial Steel Building
Welding, Braking, Rolling And Electric Galvanized, Painting Structural Steel Fabrications
Wide Span Pre-Engineering Industrial Steel Buildings Frame , Movable Container House
Structural Steel Fabrication Industrial Steel Buildings For Warehouse Frame
Movable Industrial Steel Buildings Fabrication Fire Resistence Painted
Fireproof EPS Sandwich Panel For Steel Building Wall , Roof Cladding
Glass Insulated Sandwich Panels Heat resistant For Cladding
50mm PU Sandwich Wall Panels Thermal Insulation Prefab House