Payment & Shipping Terms:
|Raw Material:||Silica Sand, Cement, Lime, Aluminum Powder, Etc.||Dry Density Grade:||<=625kgs/cbm|
|Surface Treatment:||Painted Treatment||Dry Shrink Coefficient:||<=0.5|
|Color:||White||Type:||Wallboard Or Roofboard|
|Application:||Interior Walls, Exterior Walls||Installation:||Easy|
pre engineered buildings,
multi storey steel frame buildings
1. Lighter weight
2. Self-Thermal insulation
3. Easy to install
4. High-performance and lightweight
5. High productivity competitive price
6. Autoclaved aerated concrete panels and blocks
About FASEC Prefab-I Panel:
FASEC Prefab-I panel is one kind of multi-porous concrete forming board which is made of silica sand, cement, lime, aluminum powder, etc. It is the main raw material that is cured under high temperature and high pressure steam with double-layer bidirectional steel mesh in the function of rust and anti-corrosion treatment inside. It can be used not only as the wall material such as the inner wall and the outer wall of the main building, but also the roof and floor panels. While the thin plate type like 50mm thickness can be used as the thermal insulation and fireproof board, which is a new type of building material with superior performance. It can be widely used in concrete structures and steel structure residential, office buildings, factory interior and exterior walls, slabs, roof panels, firewalls, explosion-proof walls, steel beams and columns fireproof panels, sound insulation walls, renovation of old buildings.
According to the usage, the board can be divided into partition wall panels, exterior wall panels, roof panels and floor panels. The reinforcement of each panel is determined according to the design load, material thickness and length. Generally available in thickness is from 50mm to 300mm, at intervals of 25mm. The length can be up to 6 meter.
|Depth(mm)||75, 100, 125, 150, 175, 200, 250, 300,120, 180, 240
The main performance are as follows:
When used to build external walls,our products meet all strict requirements made by various countries without use of any other auxiliary thermal protecting materials. Tests show that products with a thickness of 4-5cm perform the same function of thermal protection as one layer of common blocks; with a thickness of 7-8cm.provides the same level of thermal protection as bricks double the thickness. Therefore it is not only a material that can be used to structures, it is also a high quality thermal material.
The raw materials used in our products are absolutely non-combustible. Experiment results show that 10-cm thick walls made of our factory could stand against fire for at least 4 hours. Hence,our products have been adopted to make fireproof walls.
Test results shows that our products have excellent acoustic performance. Walls made of us could reduce the noise range from 30-52dB depending on the thickness of the walls and different surface disposed.
After combining the FASEC Prefab-I panel and steel framing together, as well as considering other pipelines and envelops etc. treatment, FASEC steel modular house can be complete in much more time saving way. Compared to traditional concrete brick buildings, FASEC house can save as much as nearly half construction period.