Payment & Shipping Terms:
|Material:||Steel||Grade:||Q235,Q345,S235,S355 ,SS400 Etc|
|Type:||Traffic Light Sign Pole||Product Name:||Light Sign Pole|
|Height:||5-20 Meters||Surface Treatment:||Hot Dip Galvanizing Or Painted|
|Shape:||Round Or Square|
municipal traffic light pole,
steel framing traffic light pole,
municipal traffic signal pole
Traffic sign pole is also known as road sign pole, highway sign pole, both sides of the highway used to indicate the traffic line of the column, traffic sign pole is processed by steel pipe, the surface after hot dip galvanized treatment.
Classification of sign posts
Traffic signs generally have single - column traffic signs, multi - column traffic signs.
The inside edge of the column sign shall not invade the building limit of the road, generally not less than 25cm from the outside edge of the roadway or sidewalk or the shoulder of the dirt road
The height of the lower edge of the traffic sign board from the road surface is divided into: the expressway shall be no less than 5500mm, and the national highway and provincial highway shall be no less than 5000mm.In urban roads with a large proportion of small cars, the height from the lower edge to the ground can be effective according to the actual situation, but should not be less than 120cm.
If the setting is on the side of the road with pedestrians and non-motor vehicles, the setting height shall be greater than 180cm.
Single column traffic sign pole
Single-column traffic sign pole is a sign board mounted on a column, suitable for medium and small size alarm,notices, injunctions, signs of direction and small signs of direction.
Multi-column traffic sign pole
Multi-column traffic sign pole is a sign board mounted on two or more columns and is suitable for rectangular indication or direction sign.
Arm type traffic sign pole
Cantilever traffic sign pole -- F traffic sign pole, T traffic sign pole. The cantilever traffic sign pole is the sign plate mounted on the cantilever, and the height of the lower edge of the sign from the ground should be higher than the clearance height specified by the road.